CUSTOMER CASE · ULTRASONIC PLASTIC WELDING
After 15 years in service, a first-generation MCSONIC ultrasonic plastic welder took on a new application: router housing assembly with insect mesh.
MCSONIC developed custom ultrasonic horn and provided on-site commissioning to adapt the customer's existing machine to a new order for a German router company.
01 / THE CHALLENGE
A new product. An existing machine.
The customer already used MCSONIC ultrasonic welding equipment. A new router housing order introduced a different part configuration and an insect mesh assembly requirement.
The previous horn could not meet the new application requirements. The task was to develop a suitable setup around the new component while retaining the existing welder.
A machine that works for one component still needs an application-specific horn review when the part changes.
02 / THE TOOLING
Custom ultrasonic horn and supporting fixture
MCSONIC developed custom ultrasonic horn for the router housing application. The photographs show the horn installed above a supporting fixture mounted on a sliding assembly.
This arrangement provided the setup for positioning the housing and carrying out trials on the existing machine. For a similar project, the horn and fixture should be evaluated together with the component, its materials and the existing ultrasonic system.
03 / ON-SITE COMMISSIONING
Working through the application together
With the new horn ready, MCSONIC visited the customer's factory for commissioning. Over the course of one day, the team and the customer carried out repeated adjustments and trials to address the new application requirements.
The one-day period refers to the on-site visit, rather than the complete horn design and manufacturing lead time. Working at the customer's station allowed the setup to be evaluated using the existing equipment and the actual parts involved in the order.
From the customer’s production station
On-site footage of the ultrasonic horn and sliding fixture during an application trial.
04 / THE OUTCOME
A new application for a machine already in service
The custom horn and on-site adjustment enabled the existing ultrasonic welder to support the new router housing application.
Equipment retained. Horn adapted.
The revised setup addressed the customer's new application requirements while keeping the existing machine in use.
This case documents one customer's application and a machine with 15 years of service. Suitability for another housing or mesh assembly requires a separate review of the equipment, parts and acceptance criteria.
What to prepare for a similar project
To help MCSONIC assess your application, share:
- Drawings or samples of the housing and mesh component.
- Material specifications for each component.
- Details of the existing welder, generator and ultrasonic stack.
- Photographs of the current horn and production station.
- The problem encountered with the current setup.
- Your inspection criteria and production requirements.
These details help establish what needs to change and what must be demonstrated during application testing.
Questions about adapting an existing ultrasonic welder
Can an existing ultrasonic welder be adapted to a new product?
It may be possible. This project used custom horn and on-site commissioning to adapt the existing machine. Other projects require an individual assessment of equipment condition, system compatibility and part requirements.
Is a new ultrasonic horn enough to complete the changeover?
This project involved custom horn and on-site adjustment. The horn, supporting fixture and machine setup need to be considered together when evaluating a new application.
Can the same horn be used for another router housing?
Compatibility should not be assumed. A different housing shape, mesh specification or assembly requirement may require changes to the horn, fixture or process setup.
What information is needed for a horn quotation?
Start with drawings or samples, material details, existing equipment specifications and acceptance requirements. Include photographs or a short video of the current process where available.
Have a new part for your existing production line?
Share your housing design, current equipment and horn requirements with MCSONIC.
Request a Horn Evaluation

